Facebook Google+ Twetter
         
         
         
         
         


Low Voltage (LV) busduct system

 

Bright track™, 690V AC (40A up to 63A)

  Bright Track™ consists of a series of fully enclosed single or three phase busbar module units. It’s available in selection of standard lengths. Each length has a facility at regular intervals to allow tap-off unit for connection. It mainly use as lighting & small power tap-off/Plug-in usage.
       
  Model : Bright Track™
  Voltage : 690V AC
  Ampere range : 40A up to 63A
  Ingress protection : IP54
  Insulation : Air insulated
  Enclosure : Metal enclosure
  Configuration : Phase busbar: Single phase; 2 phases; 3 phases
      Neutral busbar: 100% / 150% / 200% busbar
      Earth busbar: 50% / 100% bar / Housing as PE
  Conductor : Copper, Composition: 99.98% with Conductivity > 98% IACS
  Design & compliance Standards : IEC 61439-1; IEC 61439-2; IEC 60529:1989-11; BSEN 60439-2: 2000; BS5486-2: 1990; AS439-2-2002; UL-857;
      IEC60947-2:1995; IEE/IEEE
  Usage : Indoor Lighting and Small power plug-in busduct
  Mounting : Under-floor / Wall mounted / Ceiling or root top suspension mounted
       
       
       
 

Ezyfast, 1000V AC (100A up to 250A)

  Ezyfast is a three phase low ampere plug-in busduct system. This is an economy, Plug & Power solution for plug-in ampere between 100A up to 250A, which can be handle by minimum 1-2 installer, it come with 3 meter length as standard and it also available in custom length to suit the site condition. Each length has a facility at regular intervals to allow plug-in/tap-off unit for connection.
       
  Model : Ezyfast
  Voltage : 1000V AC
  Ampere range : 100A up to 250A
  Ingress protection : IP40 up to IP66
  Insulation : Thermoset blu-E-Coat™ epoxy insulation
  Enclosure : Metal enclosure
  Type of configuration : Phase busbar: 3 phases (R, Y, B / L1, L2, L3)
      Neutral busbar: 100% / 150% / 200% busbarEarth
      busbar: 50% / 100% busbar / 25% on both side / Housing as PE
  Conductor : Copper, Composition: 99.98% with Conductivity > 98% IACS
      Aluminium, Composition: 99.98% with Conductivity > 61% IACS
  Design & compliance Standards : IEC 61439-1; IEC 61439-2; IEC 60529:1989-11; BSEN 60439-2: 2000; Standards BS5486-2: 1990; AS439-2-2002; UL-857;
      IEC60947-2:1995; IEE/IEEE wiring regulation; Seismie Protection.
  Usage : Indoor Riser and Plug-in busduct
  Mounting : Wall mounted / Ceiling or root top suspension mounted
       
       
       
 

Megatron™ Compact, 1000V AC (300A up to 600A)

  Megatron™ Compact type is a three phase plug-in busduct system. It play an important role in riser busduct system, it’s take care of medium range ampere rating between 300A up to 600A. Their maintenance free systems come with thermoset blu-E-Coat™ epoxy insulation & Mylar insulation for modern high rise commercial buildings and industrial complexes. The flexibility and adaptation to site variation, ease of installation and improved electrical efficiency in the distribution of low voltage power.
       
  Model : Megatron™ Compact
  Voltage : 1000V AC
  Ampere range : 300A up to 600A
  Ingress protection : IP40 up to IP67
  Insulation : Thermoset blu-E-Coat™ epoxy insulation / Mylar
  Enclosure : Metal enclosure
  Type of configuration : Phase busbar: 3 phases (R, Y, B / L1, L2, L3)
      Neutral busbar: 100% / 150% / 200% busbar
      Earth busbar: 50% / 100% busbar / 25% on both side / Housing as PE
  Conductor : Copper, Composition: 99.98% with Conductivity > 98% IACS
      Aluminium, Composition: 99.98% with Conductivity > 61% IACS
  Design & compliance Standards : IEC 61439-1; IEC 61439-2; IEC 60529:1989-11; BSEN 60439-2: 2000; BS5486-2: 1990; AS439-2-2002; UL-857;
      IEC60947-2:1995; IEE/IEEE wiring regulation; Seismie Protection.
  Usage : Indoor and Outdoor - Riser busduct, Plug-in busduct and Distribution busduct
  Mounting : Vertical mounted / horizontal ceiling or root top suspension mounted
       
       
       
 

Megatron™ Sandwich, 1000V AC (630A up to 6300A)

  Megatron™ Sandwich type is a most common three phase plug-in and distribution busduct system in the market. It’s available between 630A up to 6300A, which is suitable for plug-in/tap-off and distribution busduct system for various kinds of building / project. Megatron™ Sandwich also comes with our unique insulation, thermoset blu-E-Coat™ epoxy insulation, which is non-hygroscopic, inert, high surface tracking and is fungus resistant. It can withstand temperature above 180°C and it also has a very high mechanical strength against thermal shock and overload, as well as very high short-circuit withstand capacity. It is both fire resistant and water proof materials. With our super compact sandwich contraction design, it is suitable almost for all modern buildings / industry.
       
  Model : Megatron™ Sandwich
  Voltage : 1000V AC
  Ampere range : 630A up to 6300A
  Ingress protection : IP 40 up to IP67
  Insulation : Thermoset blu-E-Coat™ epoxy insulation / Mylar
  Enclosure : Metal enclosure
  Type of configuration : Phase busbar: 3 phases (R, Y, B / L1, L2, L3)
      Neutral busbar: 100% / 150% / 200% busbar
      Earth busbar: 50% / 100% busbar / 25% on both side / Housing as PE
  Conductor : Copper, Composition: 99.98% with Conductivity > 98% IACS
      Aluminium, Composition: 99.98% with Conductivity > 61% IACS
  Design & compliance Standards : IEC 61439-1; IEC 61439-2; IEC 60529:1989-11; BSEN 60439-2: 2000; BS5486-2: 1990; AS439-2-2002; UL-857;
      IEC60947-2:1995; IEE/IEEE wiring regulation; Seismie Protection.
  Usage : Indoor and Outdoor - Riser busduct, Plug-in busduct and Distribution busduct
  Mounting : Vertical mounted / horizontal ceiling or root top suspension mounted
       
       
       
 

Busway CR™- LV, 1000V AC (630A up to 6300A)

  Busway CR™ - LV busduct system is a Low Voltage Cast Resin Busbar Trunking Systems, it’s consisted of different phases of busbars arranged insulated by our unique thermoset blu-E-Coat™ epoxy insulation in an orderly and in systematic geometry. The busbars are encapsulated with pre-mixed Cast Resin insulation material meeting the insulation voltage of 3.5KV or 5KV for 1 minute.
       
  Model : Busway CR™ - LV
  Voltage : 1000V AC
  Ampere range : 630A up to 6300A
  Ingress protection : IP68
  Insulation : Thermoset blu-E-Coat™ epoxy insulation
  Enclosure : Bare Cast Resin / Metal enclosure
  Type of configuration : Phase busbar: 3 phases (R, Y, B / L1, L2, L3)
      Neutral busbar: 100% / 150% / 200% busbar
      Earth busbar: 50% / 100% busbar / 25% on both side
  Conductor : Copper, Composition: 99.98% with Conductivity > 98% IACS
      Aluminium, Composition: 99.98% with Conductivity > 61% IACS
  Design & compliance Standards : IEC 61439-1; IEC 61439-2; IEC 60529:1989-11; BSEN 60439-2: 2000;BS5486-2: 1990; AS439-2-2002; UL-857; IEC60947-
      2:1995; IEC 60331; IEC 60332 IEE/IEEE wiring regulation; Seismie Protection.
  Usage : Indoor, Outdoor and Water immersed - Riser busduct, Plug-in busduct and Distribution busduct.
  Mounting : Vertical mounted / horizontal ceiling or root top suspension mounted